Input Signal Not Found hp Monitor [Fixes]

It can be quite annoying when your Hp monitor displays no screen, and instead pops up an error screen showing “Input Signal Not Found”.

We have been in your shoes, and we know this situation can be pretty stressful.

Thus, we have compiled this step-by-step guide, in which we have put together different solutions which you can try for fixing the input signal not found problem.

That being said, let’s jump right into the matter and check out the details.

Fixing the Input Signal Not Found Issue on Hp Monitor (Step-by-Step)

Fixing the input signal issue on Hp monitors is super-easy and straightforward. You can fix this issue on your own without requiring any expert help. Below, we have compiled all the steps that you need to follow in order for fixing this issue.

1. Checking for the Loose Connections

First of all, you would need to check out the connection between your monitor and the PC. If the connection between the monitor and the PC is loose, you would have to fix it.

Here are the Steps for Fixing the Loose Connection Issue:

  • Firstly, you would need to turn off your PC and the monitor, and then plug them out from the power.
  • Now, take out the HDMI/DP cable, and reinsert it.
  • Afterward, reinsert the power cables into the monitor, and turn on the PC.

If you see a display on your monitor, then the loose connection was the issue. Otherwise, move on to the next steps.

2. Changing the Cable

In this next step, you need to change the display cable. If there is no display error on your monitor, it can be due to the faulty display cable.  The display cable changing process is pretty easy and straightforward.

Here are the Steps for Changing the Display Cable:

  • First of all, switch off your PC, and unplug the cables from the PC.
  • Now, plug the new display cable into the PC, as well as the monitor.
  • Also, plug the other cables into the PC.
  • Switch on the PC, and check out if it shows your display or not.

If it shows you a display, you are good to go, otherwise, move on to the next steps.

3. Cleaning the Ports

Another hack that you can try for fixing the no input signal issue on the Hp monitor is to clean the ports on the monitor as well as the PC. Over time, dirt and other dust particles can make into the ports of your PC, which eventually leads to no signal issue.

Here are the Steps for Cleaning the Ports on the Monitor & PC:

  • First of all, power off the PC, and disconnect it from the power.
  • Take an old Toothbrush dip it in cleaning solution, and gently clean both the ports on the monitor as well as on the monitor.
  • Allow some time for the drying of the ports.
  • Afterward, connect the ports, and you are good to go.

Changing the Port Type

If none of the above-given solutions work out for you, then you have to switch the port type of your monitor. For example, if you are currently using the HDMI port, now you have to use the DP, or vice versa.

Change the Monitor

Finally, you have to change the monitor, and check if the other monitors work or not. If the other monitor works, then your monitor is faulty, and you have to change the monitor.

Frequently Asked Questions (FAQs)

Can We Fix the Input Signal Not Found Issue on the Hp Monitor?

Yes, you can fix the input signal not found the issue on the Hp monitors. Above, we have compiled all the steps that you need to take for fixing the no signal issue on the Hp monitor.

What are the Reasons for No Signal Issue on the Hp Monitor?

There can be a variety of different reasons for the no signal issue on the Hp monitor including the faulty display cable, faulty display cable, and a bad monitor.

Can A Faulty Display Cable Cause the No Signal Issue?

Yes, a faulty display cable can cause the no signal issue on the monitor. It is one of the many reasons which can cause the no signal issue.

Conclusion

Input signal not found issue just like any other computer issue can be quite frustrating to deal with. Above, we have compiled all the steps that you can try to fix the input signal not found the issue on the Hp monitor.

If you are still confused about the input signal issue, tell us in the comments section below, and we would love to help you out.

Leave a Comment